120V 15A Class A Inline GFCI Power Cord – Rainproof 12-Foot 16/3 Replacement Cord for Spas, Hot Tubs and Compatible Equipment
$43.99
$39.99
Replace a damaged or nonworking power cord while adding accessible ground-fault protection between the outlet and your compatible equipment.
This inline GFCI power cord is rated for 120 volts, 15 amps, 60 Hz, and up to 1,800 watts. Its Class A ground-fault circuit interrupter includes TEST and RESET controls for checking and restoring operation. The inline design keeps the GFCI away from the wall plug, making it easier to connect in locations where a bulky GFCI plug may not fit comfortably.
The rainproof construction and 12-foot 16/3 cord make it a practical replacement option for compatible hot tubs, spas, and other equipment that requires the same electrical ratings and connections.
This is not a universal replacement cord. Always compare the voltage, amperage, wattage, frequency, cord construction, plug, and equipment-side connection with your existing cord and equipment documentation before ordering.
Specifications
Product type: Replacement inline GFCI power cord
GFCI classification: Class A
Certification: UL
Weather protection: Rainproof
Voltage: 120V
Maximum amperage: 15A
Frequency: 60 Hz
Maximum power: 1,800W
Cord length: 12 feet
Cord construction: 16/3
Number of conductors: Three
GFCI controls: TEST and RESET
GFCI placement: Inline
Wall connection: Grounded three-prong plug
Color: Black
Quantity included: One
Potential Applications
This cord may be suitable for:
- Compatible plug-and-play hot tubs
- Compatible portable spas
- Compatible outdoor equipment
- Compatible portable electrical equipment
- Replacement applications requiring an inline Class A GFCI
- Equipment rated for 120V, 15A, 60 Hz, and no more than 1,800W
Suitability depends on the equipment manufacturer’s requirements and the exact plug and equipment-side connection. The electrical rating alone does not guarantee compatibility.
Confirm Compatibility Before Ordering
Check all of the following:
- Voltage: Your equipment requires 120V.
- Amperage: The equipment does not exceed 15A.
- Frequency: The equipment operates at 60 Hz.
- Wattage: The equipment does not exceed 1,800W.
- Cord construction: The application permits a 16/3 cord.
- Cord length: A 12-foot cord is appropriate.
- Wall plug: The plug matches the intended grounded receptacle.
- Equipment connection: The opposite end matches the existing cord.
- Manufacturer requirements: The equipment manufacturer permits this type of replacement cord.
Important Safety Information
- This is not a universal replacement cord.
- Do not use it with 240V equipment.
- Do not connect equipment exceeding 15A or 1,800W.
- Connect only to an appropriate grounded receptacle.
- Do not substitute this cord for a different wire gauge without confirming that the application permits 16/3 construction.
- Test the GFCI according to its instructions before operating the connected equipment.
- Stop using the cord if the housing, plug, insulation, conductors, or GFCI controls are damaged.
- Electrical equipment used near water must be installed and operated according to the equipment manufacturer’s instructions and applicable electrical codes.
- Have a qualified technician or electrician complete the installation if you are unfamiliar with electrical connections.
frequently asked questions
Q: What equipment can this GFCI cord be used with?
A: It may be used with compatible hot tubs, spas, and other equipment requiring a 120V, 15A, 60 Hz inline Class A GFCI cord. The cord construction and both connections must also match the application.
Q: Is this cord only for hot tubs and spas?
A: No. Hot tubs and spas are important potential applications, but the cord may work with other compatible equipment. Always confirm the complete electrical and connection requirements first.
Q: Will it fit every 120V appliance or piece of equipment?
A: No. Matching voltage is only one part of compatibility. You must also confirm the amperage, wattage, frequency, wire gauge, cord length, wall plug, equipment connection, and manufacturer requirements.
Q: What is the maximum electrical rating?
A: The cord is rated for 120V, 15A, 60 Hz, and up to 1,800W.
Q: Is the GFCI rainproof?
A: Yes. The GFCI is identified as rainproof. Follow all equipment instructions and applicable electrical requirements when using electrical products outdoors or near water.
Q: Does it have TEST and RESET controls?
A: Yes. The inline GFCI includes TEST and RESET controls.
